HOPO Pro Series Heavy-Duty Lift-and-Slide Door Hardware System
HOPO Pro Series Heavy-Duty Lift-and-Slide Door Hardware System

HOPO PRO SERIES

HOPO Pro Series Heavy-Duty Lift-and-Slide Door Hardware System

The HOPO Pro Series Heavy-Duty Lift-and-Slide Door Hardware System is designed for large-format, heavy lift-and-slide দরজাগুলো. Turning the হ্যান্ডেল actuates the lift-and-lower movement and multipoint লকing. In the closed position, the পাল্লা lowers by approximately 7 mm to compress the perimeter gaskets. The coordinated হার্ডওয়্যার package combines উচ্চ ভার capacity, smooth running, comfortable operation and স্থাপন efficiency. Final দরজা performance depends on the প্রোফাইল system, glazing, সিলিং layout and verified দরজা testing.

Technical Information

The values below describe the current system configuration. Final পাল্লা dimensions and project suitability depend on the প্রোফাইল system, glazing, সিলিং layout and verified দরজা testing.

System Type
Heavy-duty lift-and-slide দরজা হার্ডওয়্যার
Series
HOPO Pro Series
Nominal Sash Weight
Up to 250 kg — standard রোলার configuration
Extended Load Range
250–400 kg per পাল্লা with additional auxiliary রোলারগুলো; configuration dependent
Lift / Lower Stroke
Approx. 7 mm
Handle Spindle
10 × 10 mm
Handle Fixing
M6 stainless-steel countersunk screws, through-bolted

HOPO PRO SERIES

Solution Advantages

Lift-and-Lock Action for Perimeter Compression

Lift-and-Lock Action for Perimeter Compression

Turning the হ্যান্ডেল lowers the পাল্লা and engages the multipoint লকing system, compressing the perimeter gaskets. This supports the air, water, acoustic and wind-load performance of the completed দরজা assembly. Final performance depends on the প্রোফাইল, সিলিং configuration and verified test results.

High Load Capacity with Smooth, Quiet Travel

High Load Capacity with Smooth, Quiet Travel

The standard configuration supports a nominal পাল্লা weight of up to 250 kg. Additional রোলার units can extend the load-bearing configuration for larger পাল্লাগুলো, while the coordinated রোলার system promotes smooth and quiet travel.

Extended Handle for Easier Operation

Extended Handle for Easier Operation

The extended হ্যান্ডেল provides greater leverage to help reduce operating force and improve grip comfort during daily use.

Multiple Handle Configurations

Multiple Handle Configurations

Double-sided হ্যান্ডেলগুলো with or without cylinder preparation, plus a single-sided হ্যান্ডেল with recessed pull, support different access and লকing requirements.

Integrated Damping and Concealed Upper Locking

Integrated Damping and Concealed Upper Locking

The lift-and-slide drive gear incorporates a damping mechanism to reduce হ্যান্ডেল kickback as the পাল্লা lowers. The upper লকিং পয়েন্ট is concealed within the প্রোফাইল chamber for a cleaner appearance.

Multi-Position Hold for Controlled Ventilation

Multi-Position Hold for Controlled Ventilation

The পাল্লা can be held at selected positions along its travel to provide controlled ventilation. Security and wind-load performance in a ventilation position depend on the complete দরজা design and verified testing.

Precision-Cast Stainless-Steel Strikers

Precision-Cast Stainless-Steel Strikers

Precision-cast stainless-steel strikers provide robust support at the লকিং পয়েন্টs and help improve resistance to deformation and forced levering.

Alignment Features for Efficient Installation

Alignment Features for Efficient Installation

The main and auxiliary রোলার assemblies incorporate initial-position alignment features for faster, more accurate স্থাপন. The strikers support direct screw fixing, while the হ্যান্ডেল uses a 10 × 10 mm spindle and M6 through-bolted fasteners.

Corrosion-Resistant Surface Protection

Corrosion-Resistant Surface Protection

Selected হার্ডওয়্যার উপাদানs and ক্ষয়-প্রতিরোধী পৃষ্ঠতল প্রক্রিয়াকরণs support reliable long-term use. Specific finish and corrosion-performance data should be matched to the verified product configuration.

Durability Engineered for Long-Term Use

Durability Engineered for Long-Term Use

The coordinated হার্ডওয়্যার system is designed for repeated daily operation and stable long-term performance. Cycle-test claims will be published with the corresponding verified test method and report.

HOPO PRO SERIES

সমাধান কনফিগারেশন

The হার্ডওয়্যার package is shown alongside its component layout. Standard parts and selectable হ্যান্ডেল, striker and auxiliary-রোলার options are presented together for direct comparison. Final selection depends on the প্রোফাইল system, পাল্লা weight and project requirements.

সমাধান কনফিগারেশন
  1. 1-1

    Double-Sided Lift-and-Slide Handle Set

    168 জীবাণুরোধী textured কালো; ঐচ্ছিক 012 সিলভার; with cylinder preparation

    1 set LSHD706.01.012HPRO5
  2. 1-1

    সিলিন্ডার

    Cylinder specification selectable

    1 pc C99.XXXXC4T029
  3. 1-2

    Double-Sided Lift-and-Slide Handle Set

    168 জীবাণুরোধী textured কালো; ঐচ্ছিক 012 সিলভার; without cylinder preparation

    0 set LSHD706.00.012HPRO5
  4. 1-3

    Single-Sided Lift-and-Slide Handle Set

    168 জীবাণুরোধী textured কালো; ঐচ্ছিক 012 সিলভার; without cylinder preparation

    0 set LSHS706.00.012HPRO5
  5. 4

    Lift-and-Slide Drive Gear

    37.5 mm centre distance

    1 pc LSG725.20.011HPRO5
  6. 5

    Lift-and-Slide Accessory Pack

    13 mm bলক thickness; ঐচ্ছিক 16/18/20/21/25 mm

    1 set LSAB70.50.13
  7. 6

    Lift-and-Slide Striker

    Stainless steel; choose one of the three according to the প্রোফাইল লকing-groove structure

    2 pcs SLP725.01.384X
  8. 6

    Lift-and-Slide Striker

    Stainless steel; choose one of the three according to the প্রোফাইল লকing-groove structure

    0 pc SLP725.02.384X
  9. 7

    Lift-and-Slide Striker

    Stainless steel; choose one of the three according to the প্রোফাইল লকing-groove structure

    0 pc SLP725.03.38X
  10. 8

    Lift-and-Slide Roller অ্যাসেম্বলি

    250 kg

    1 set LSBR725.00.1T015HPRO5
  11. 9

    Lift-and-Slide Threaded Rod

    1.5 m; ঐচ্ছিক 1.1/1.8/2.0 m

    1 pc LSS70.10.15C38
  12. 10

    Auxiliary Roller

    Optional for a per-পাল্লা load of 250–400 kg

    2 pcs LSBR725.31.1T015HPRO5
একটি বার্তা ছেড়ে দিন

আপনার প্রকল্প বা পণ্যের চাহিদা সম্পর্কে আমাদের জানান। আমাদের দল তথ্য পর্যালোচনা করে উপযুক্ত জানালা ও দরজা হার্ডওয়্যার সহায়তা নিয়ে দ্রুত আপনার সঙ্গে যোগাযোগ করবে।

    ইমেইল বা WhatsApp — অন্তত একটি পূরণ করা আবশ্যক।

      নিজের সম্পর্কে আমাদের বলো

      যোগাযোগের তথ্য

      ইমেইল বা WhatsApp — অন্তত একটি পূরণ করা আবশ্যক।