G46 SERIES
G46 Tilt-and-Slide Window Herrajes System
The G46 tilt-and-slide window hardware system combines wide-opening parallel sliding with stable tilt ventilation. The sash moves inward by 72 mm before sliding and the dual-arm structure provides a 115 mm tilt distance. The existing product data specifies sash capacity up to 100 kg, thermal-break widths of 24 mm or 35.3 mm, and selectable 13 mm or 6.5 mm drive-gear centre distances.
Información técnica
The values below are limited to dimensions, capacities and options stated in the existing G46 page, configuration table and product imagery. Final window dimensions and project suitability depend on the profile, glazing and verified complete-window performance.
- System Type
- G46 tilt-and-slide window hardware system
- Maximum Hoja Weight
- Up to 100 kg
- Inward Parallel Movement
- 72 mm
- Tilt Distance
- 115 mm
- Thermal-Break Widths
- 24 mm / 35.3 mm
- Drive-Gear Centre Distance
- 13 mm or 6.5 mm, depending on the selected system
- Spindle Length
- 25 mm
- Opening Modes
- Parallel sliding and tilt ventilation
G46 SERIES
Ventajas del sistema
Información del perfil
Thermal-break widths: 24 mm / 35.3 mm.
Wide Opening Without Occupying Interior Space
The sash moves inward by 72 mm before sliding, enabling large-area ventilation without interfering with curtains or occupying the room.
Stable Tilt Ventilation
The dual-arm design provides a 115 mm tilt distance for micro-ventilation, a wider opening angle and stable support.
Up to 100 kg Hoja Capacity
A high-strength hard-alloy spindle with a steel-ball bearing supports sash weights up to 100 kg, including large triple-glazed windows.
Smooth, Low-Noise Travel
Polymer rollers and the dual-assist structure support smooth, quiet and lower-effort sliding.
Inward Self-Locking Protection
The inward self-locking design helps prevent collision and friction between the sash and frame, protecting the window and its hardware.
Dual-Sided Anti-Misoperation Protection
The design prevents handle rotation after opening, helping avoid collision between locking points and strikers.
Expandable Multipoint Locking
Additional locking points can be fitted at the top and bottom of the sash as required. Multipoint sealing supports wind resistance and sound insulation.
Secure Quick-Fit Fastening
Set screws and clamping pieces support quick installation and secure fastening.
Positioned One-Step Rodillo Installation
The upper and lower roller assemblies locate through the corner groove for one-step installation.
Installation Without Weakening the Perfil
The roller assembly installs without damaging the profile or corner cleats, helping preserve the sash structure.
G46 SERIES
Configuración de la solución
The first six rows preserve the standard G46 configuration. The following seven rows preserve the optional-accessory table; repeated item numbers and the source product codes are retained exactly.
-
1
1 pza.
PH952 Manilla
168 Antibacterial matte black. Available in 012 silver
PH952.00.168HPRO5 -
2
1 pza.
Cuadradillo SP07
25mm
SP07.12.25C021X -
3-1
0 pza.
Sistema de ventanas deslizantes e inclinables (izquierda)
Distancia entre ejes: 13 mm, izquierda
ASS56.00.031LHPRO4 -
3-1
1 juego
Sistema de ventanas deslizantes e inclinables (derecha)
Distancia entre ejes: 13 mm, derecha
ASS56.00.031RHPRO4 -
3-2
0 juegos
Sistema de ventanas deslizantes e inclinables (izquierda)
Distancia entre ejes: 6,5 mm, izquierda
ASS56.06.031LHPRO4 -
3-2
1 juego
Sistema de ventanas deslizantes e inclinables (derecha)
Distancia entre ejes: 6,5 mm, derecha
ASS56.06.031LHPRO4 -
1
As needed pza.
Varilla de aluminio
Longitud de 1500 mm. Seleccione una unidad cuando el ancho de hoja sea inferior a 1100 mm y dos unidades cuando supere los 1100 mm.
DR56.15.065X -
2
As needed pza.
Varilla de cierre horizontal
Para anchos de hoja superiores a 1400 mm, se recomienda añadir un conjunto.
ALR56.01.031X -
3
As needed pza.
Cerradero
Para anchos de hoja superiores a 1400 mm, se recomienda añadir un conjunto.
ALP56.00.031X -
4
As needed pza.
Varilla de cierre inferior horizontal
Para hojas de más de 1000 mm de ancho, se recomienda añadir un conjunto.
ALR56.03.031X -
5
As needed pza.
cerradero inferior horizontal
Para hojas de más de 1000 mm de ancho, se recomienda añadir un conjunto.
ALP56.03.031X -
6
As needed pza.
Varilla de cierre
Se recomiendan unidades adicionales para alturas de hoja superiores a 1300 mm-agregue dos juegos; para alturas de hoja superiores a 2000 mm, agregue cuatro juegos
ALR56.02.031HPRO4 -
7
As needed pza.
cerradero extendida
Se recomiendan unidades adicionales para alturas de hoja superiores a 1300 mm-agregue dos juegos; para alturas de hoja superiores a 2000 mm, agregue cuatro juegos
ALP56.02.031HPRO4
Deja un comentario
Cuéntenos brevemente las necesidades de su proyecto o producto. Nuestro equipo revisará la información y se pondrá en contacto con usted para ofrecerle el soporte adecuado en herrajes para puertas y ventanas.