G46 SERIES
G46 Tilt-and-Slide Window Hardware System
The G46 tilt-and-slide window hardware system combines wide-opening parallel sliding with stable tilt ventilation. The sash moves inward by 72 mm before sliding and the dual-arm structure provides a 115 mm tilt distance. The existing product data specifies sash capacity up to 100 kg, thermal-break widths of 24 mm or 35.3 mm, and selectable 13 mm or 6.5 mm drive-gear centre distances.
Technical Information
The values below are limited to dimensions, capacities and options stated in the existing G46 page, configuration table and product imagery. Final window dimensions and project suitability depend on the profile, glazing and verified complete-window performance.
- System Type
- G46 tilt-and-slide window hardware system
- Maximum Sash Weight
- Up to 100 kg
- Inward Parallel Movement
- 72 mm
- Tilt Distance
- 115 mm
- Thermal-Break Widths
- 24 mm / 35.3 mm
- Drive-Gear Centre Distance
- 13 mm or 6.5 mm, depending on the selected system
- Spindle Length
- 25 mm
- Opening Modes
- Parallel sliding and tilt ventilation
G46 SERIES
Solution Advantages
Profile Information
Thermal-break widths: 24 mm / 35.3 mm.
Wide Opening Without Occupying Interior Space
The sash moves inward by 72 mm before sliding, enabling large-area ventilation without interfering with curtains or occupying the room.
Stable Tilt Ventilation
The dual-arm design provides a 115 mm tilt distance for micro-ventilation, a wider opening angle and stable support.
Up to 100 kg Sash Capacity
A high-strength hard-alloy spindle with a steel-ball bearing supports sash weights up to 100 kg, including large triple-glazed windows.
Smooth, Low-Noise Travel
Polymer rollers and the dual-assist structure support smooth, quiet and lower-effort sliding.
Inward Self-Locking Protection
The inward self-locking design helps prevent collision and friction between the sash and frame, protecting the window and its hardware.
Dual-Sided Anti-Misoperation Protection
The design prevents handle rotation after opening, helping avoid collision between locking points and strikers.
Expandable Multipoint Locking
Additional locking points can be fitted at the top and bottom of the sash as required. Multipoint sealing supports wind resistance and sound insulation.
Secure Quick-Fit Fastening
Set screws and clamping pieces support quick installation and secure fastening.
Positioned One-Step Roller Installation
The upper and lower roller assemblies locate through the corner groove for one-step installation.
Installation Without Weakening the Profile
The roller assembly installs without damaging the profile or corner cleats, helping preserve the sash structure.
G46 SERIES
Solution Configuration
The first six rows preserve the standard G46 configuration. The following seven rows preserve the optional-accessory table; repeated item numbers and the source product codes are retained exactly.
-
1
1 pc
PH952 Handle
168 Antibacterial matte black. Available in 012 silver
PH952.00.168HPRO5 -
2
1 pc
SP07 Square Spindle
25mm
SP07.12.25C021X -
3-1
0 pc
Tilt and Slide Window System (Left)
13mm Center distance, left
ASS56.00.031LHPRO4 -
3-1
1 set
Tilt and Slide Window System (Right)
13mm Center distance, right
ASS56.00.031RHPRO4 -
3-2
0 set
Tilt and Slide Window System (Left)
6.5mm Center distance, left
ASS56.06.031LHPRO4 -
3-2
1 set
Tilt and Slide Window System (Right)
6.5mm Center distance, right
ASS56.06.031LHPRO4 -
1
As needed pc
Aluminum Rod
1500 mm length. Select one unit when sash width is below 1100 mm; select two units when sash width exceeds 1100 mm
DR56.15.065X -
2
As needed pc
Horizontal Locking Rod
Additional units are recommended for sash width over 1400 mm-add one set
ALR56.01.031X -
3
As needed pc
Locking Plate
Additional units are recommended for sash width over 1400 mm-add one set
ALP56.00.031X -
4
As needed pc
Horizontal Lower Locking Rod
Additional units are recommendedfor sash width over 1000 mm-add one set
ALR56.03.031X -
5
As needed pc
Horizontal Lower Locking Plate
Additional units are recommendedfor sash width over 1000 mm-add one set
ALP56.03.031X -
6
As needed pc
Locking Rod
Additional units are recommended for sash height over 1300 mm-add two sets; for sash height over 2000 mm, add four sets
ALR56.02.031HPRO4 -
7
As needed pc
Extended Locking Plate
Additional units are recommended for sash height over 1300 mm-add two sets; for sash height over 2000 mm, add four sets
ALP56.02.031HPRO4
Leave A Message
Tell us a little about your project or product needs. Our team will review your information and get back to you with the right window and door hardware support.