G46 SERIES
G46 Tilt-and-Slide Window Ferragens System
The G46 tilt-and-slide window hardware system combines wide-opening parallel sliding with stable tilt ventilation. The sash moves inward by 72 mm before sliding and the dual-arm structure provides a 115 mm tilt distance. The existing product data specifies sash capacity up to 100 kg, thermal-break widths of 24 mm or 35.3 mm, and selectable 13 mm or 6.5 mm drive-gear centre distances.
Informações técnicas
The values below are limited to dimensions, capacities and options stated in the existing G46 page, configuration table and product imagery. Final window dimensions and project suitability depend on the profile, glazing and verified complete-window performance.
- System Type
- G46 tilt-and-slide window hardware system
- Maximum Folha Weight
- Up to 100 kg
- Inward Parallel Movement
- 72 mm
- Tilt Distance
- 115 mm
- Thermal-Break Widths
- 24 mm / 35.3 mm
- Drive-Gear Centre Distance
- 13 mm or 6.5 mm, depending on the selected system
- Spindle Length
- 25 mm
- Opening Modes
- Parallel sliding and tilt ventilation
G46 SERIES
Vantagens do sistema
Informações do perfil
Thermal-break widths: 24 mm / 35.3 mm.
Wide Opening Without Occupying Interior Space
The sash moves inward by 72 mm before sliding, enabling large-area ventilation without interfering with curtains or occupying the room.
Stable Tilt Ventilation
The dual-arm design provides a 115 mm tilt distance for micro-ventilation, a wider opening angle and stable support.
Up to 100 kg Folha Capacity
A high-strength hard-alloy spindle with a steel-ball bearing supports sash weights up to 100 kg, including large triple-glazed windows.
Smooth, Low-Noise Travel
Polymer rollers and the dual-assist structure support smooth, quiet and lower-effort sliding.
Inward Self-Locking Protection
The inward self-locking design helps prevent collision and friction between the sash and frame, protecting the window and its hardware.
Dual-Sided Anti-Misoperation Protection
The design prevents handle rotation after opening, helping avoid collision between locking points and strikers.
Expandable Multipoint Locking
Additional locking points can be fitted at the top and bottom of the sash as required. Multipoint sealing supports wind resistance and sound insulation.
Secure Quick-Fit Fastening
Set screws and clamping pieces support quick installation and secure fastening.
Positioned One-Step Rolete Installation
The upper and lower roller assemblies locate through the corner groove for one-step installation.
Installation Without Weakening the Perfil
The roller assembly installs without damaging the profile or corner cleats, helping preserve the sash structure.
G46 SERIES
Configuração da solução
The first six rows preserve the standard G46 configuration. The following seven rows preserve the optional-accessory table; repeated item numbers and the source product codes are retained exactly.
-
1
1 un.
PH952 Manípulo
168 Antibacterial matte black. Available in 012 silver
PH952.00.168HPRO5 -
2
1 un.
Quadrado SP07
25mm
SP07.12.25C021X -
3-1
0 un.
Sistema de janelas de oscilo-paralela (esquerda)
Distância entre eixos: 13 mm, esquerda
ASS56.00.031LHPRO4 -
3-1
1 conjunto
Sistema de janela de oscilo-paralela (direito)
13mm Distância central, direita
ASS56.00.031RHPRO4 -
3-2
0 conjuntos
Sistema de janelas de oscilo-paralela (esquerda)
Distância entre eixos: 6,5 mm, esquerda
ASS56.06.031LHPRO4 -
3-2
1 conjunto
Sistema de janela de oscilo-paralela (direito)
6.5mm Distância central, direita
ASS56.06.031LHPRO4 -
1
As needed un.
Haste de alumínio
Comprimento de 1500 mm. Selecione uma unidade quando a largura da folha for inferior a 1100 mm e duas unidades quando exceder 1100 mm.
DR56.15.065X -
2
As needed un.
Haste de fecho horizontal
Para larguras de folha superiores a 1400 mm, recomenda-se adicionar um conjunto.
ALR56.01.031X -
3
As needed un.
Chapa de fecho
Para larguras de folha superiores a 1400 mm, recomenda-se adicionar um conjunto.
ALP56.00.031X -
4
As needed un.
Haste de fecho inferior horizontal
Para folhas com mais de 1000 mm de largura, recomenda-se adicionar um conjunto.
ALR56.03.031X -
5
As needed un.
chapa de fecho inferior horizontal
Para folhas com mais de 1000 mm de largura, recomenda-se adicionar um conjunto.
ALP56.03.031X -
6
As needed un.
Haste de fecho
Para alturas de folha superiores a 1300 mm, recomenda-se adicionar dois conjuntos; acima de 2000 mm, quatro conjuntos.
ALR56.02.031HPRO4 -
7
As needed un.
chapa de fecho estendida
Para alturas de folha superiores a 1300 mm, recomenda-se adicionar dois conjuntos; acima de 2000 mm, quatro conjuntos.
ALP56.02.031HPRO4
Deixe uma mensagem
Indique-nos brevemente as necessidades do seu projeto ou produto. A nossa equipa analisará as informações e entrará em contacto para prestar o apoio adequado em ferragens para portas e janelas.